SOLTEK 85DR2-DC Manual page 95

Series 85DR2: 85DR2, 85DR2-L, 85DR2
7. Choose "Yes" when asked whether you want to start your computer. Be
sure to remove the diskette from drive A.
5-2.3-3 Confirming Driver Installation in Windows 98/95
To confirm that the driver has been properly loaded in Win 95/98, perform
the following steps:
1. Choose "Settings" from the "Start" menu.
2. Choose "Controller Panel", and then double-click on the "System" icon.
3. Choose the "Device Manager" tab, and click the "+" in front of "SCSI &
RAID controllers." "Win95-98 Promise FastTrak133-Lite controller"
should appear.
5-2.4 DOS/Windows 3.1x
For first -time installation, follow the standard procedure of installing DOS
on to your hard disk (partition all hard drive with FDISK and format be-
fore performing the following procedure):
1. Insert "Disk 1" of your DOS installation diskettes into drive A:.
2. Type "A:\SETUP" at the "A:\" prompt.
3. Continue with normal DOS installation procedure, and refer to your DOS
manual for additional details.
Note:
The FastTrak133-Lite BIOS supports both DOS and Windows 3.1x
without software drivers installed.
+ , 85DR2 + -L
102