SOLTEK 85DR2-DC Manual page 76

(Optional) Redstorm
Overclocking Tech
CPU Ratio
Selection
CPU Linear
Frequency
CPU Clock If CPU Linear Frequency is set Enabled, this item
PCI Clock Auto
Detection
Spread Spec-
trum Selection
AGP Voltage
Control
DIMM Voltage
Control
Press <Enter> to start RED STORM OVERCLOCK-
ING TECH. This option gives user an easy way to
overclocking. It will increase CPU external clock
automatically. When CPU external clock increases
to an unacceptably high value, BIOS will restart your
system, then running at an acceptable CPU exter-
nal clock.
If CPU onboard is one with an adjustable or un-
locked CPU ratio, this item allows you user to ad-
just the CPU Ratio.
This item allows you to enable / disable this setting
function.
allows you to set CPU Clock.
Choices: 100MHz ~200MHz in 1MHz stepping.
Allows you to enable / disable (default)this auto de-
tection function on PCI clock.
If CPU Linear Frequency is disabled, use this item
to enable/disable (default)Spread Spectrum
Selection. This function will reduce the EMI
(Electromagnetic Interference) in your system. If
you do not have an EMI problem, leave this item
disabled.
Allows you to configure the AGP Voltage.
Choices: 1.5V; 1.6V; 1.7V; 1.8V
Allows you to configure the DIMM Voltage.
Choices: 2.5V; 2.6V; 2.7V; 2.8V
79
Chapter 4 BIOS Setup