1-2.5 Multi-I/O Function; 1-2.6 Expansion Slots; 1-2.7 Accelerated Graphics Port (Agp) Interface; 1-2.8 Form Factor - SOLTEK 85DR2-DC Manual

1-2.5 Multi-I/O Function

• PCI EIDE Controller, supporting:
-- 2x UATA100/66/33 IDE connectors supporting up to 4 IDE devices
• Dedicated IR Functions:
-- Third serial port dedicated to IR function either through the two
complete serial ports or the third dedicated port Infrared-IrDA (HPSIR)
and ASK (Amplitude Shift Keyed) IR
• Multi-mode Parallel Data Transfer:
-- Standard mode, high speed mode ECP and enhanced mode EPP
• Floppy Disk Connector:
-- One FDD connector supporting 2 floppy drives with drive swap support
• Universal Serial Bus Transfer Mode:
-- USB V2.0 compliant; 480Mb/s USB Bus, supporting Windows 2000/XP or later
operating system
-- USB drivers provided in Support CD for installation
-- 2 built-in USB connectors and 2 USB Headers which require 2 optional
USB cables to provide 4 more optional USB ports
• PS/2 Keyboard and PS/2 Mouse
• UARTs (Universal Asynchronous Receiver / Transmitter):
-- Two complete serial ports (COM1 & COM2) on board

1-2.6 Expansion Slots

• 5 PCI bus Master slots
• 1 AGP 4X slot
• 2 DDR DIMM slots

1-2.7 Accelerated Graphics port (AGP) Interface

AGP Controller embedded on board, supporting:
• 1.5V(4X) power mode only
• 4x AD and SBA signaling, AGP pipelined split-transaction longburst
transfers up to 1GB/sec.
• AGP 4X only, AGP V2.0 compliant

1-2.8 FORM FACTOR

• ATX Form Factor, ATX Power Supply, version 2.03 compliant, supported
by one Main Power Connector, one +12V Power Connector.
• Mainboard size: 305mm x 192mm
Chapter 1 Specification
11