To Verify 6-Channel Audio Configuration; 3-3.1 To Verify 6-Channel Audio On Volume Control - SOLTEK B7A-F User Manual

B7A-F

3-3 To Verify 6-channel Audio Configuration

After installation of AC'97 6-channel Codec(AC'97 Driver is already
packed in the nVIDIA nForce2 All-in-1 Driver), you must configure the
5.1 Speaker connection to enable the 6-channel audio.

3-3.1 To verify 6-channel Audio on Volume Control

1. Connect your on-board Audio Connector to your 6-channel speakers
as depicted in the figure below:
2. After Connection is done,
start your Windows and
double click the speaker
icon in the taskbar to enter
volume configuration:
Orange Connector
to Center/ Subwoofer Speaker Out
Black Connector to Rear Speaker Out
Green Connector to Front Speaker Out
46
double click