Launching The Pc Application; Exiting The Pc Application - Konica Minolta CR-10 Plus Instruction Manual

Connecting to a PC

Launching the PC Application

Memo The PC application cannot be run when logged in to the PC under a "Guest"
account.
Notes [Windows10/11]
When starting the PC application, if ".NET Framework 3.5" is requested, follow
the procedure below to confi gure the settings.
(Procedure)
Under [Control Panel] → [Programs and Features], select "Turn Windows
features on or off".
In the Windows Features window, check the box next to ".NET Framework 3.5"
and click "OK". Follow the displayed procedure to install.
If this installation is not completed properly, be sure to verify that Windows
Update works as it should.
❶
When connecting to a PC, an AutoPlay
dialog will be displayed. Click "Open
folder to view fi les"
Notes Writing to the instrument memory is
not permitted. Note that even if fi les
are moved they will not be saved to
the instrument.
❷
Copy the "CRX_APP.exe" fi le in the
APP folder and the MANUAL folder to
the PC's hard drive.
Notes If the PC application is run from
within the APP folder, some
functions may not be usable
depending on the PC. Copy the fi le
to the PC's hard drive before using.
(Cont.)
❸
Double-click the "CRX_APP.exe" fi le
copied to the PC's hard drive to launch
the PC application.
Notes If a screen similar to the following
appears, click "OK" to close the
dialog, and reconnect the
instrument via USB.
Memo The PC application does not support
connections to multiple instruments.

Exiting the PC Application

❶
Click in the upper-right corner of the PC
application, or click "Exit".
❷
When a message asking, "Are you sure you
want to exit the program?" is displayed, click
"Yes".
You will be exited out of the PC application.
Notes When disconnecting the USB cable, be sure
to exit the PC application or turn OFF the
instrument power fi rst.
41