Konica Minolta CR-10 Plus Instruction Manual page 52

Instrument Settings
4
Confi gure Tol.
The preset function allows tolerances other than ΔE to be set.
4-1
Click the check box to the left of the item to confi gure.
(Here, the color space is set to L*a*b*, and the tolerances for ΔL* and Δa* are
confi gured.)
4-2
Click the check box to the left of ΔL*.
The box to the right of ΔL*≤ will become active.
4-3
Enter a value.
Clicking in the value input box will cause the numeric pad to appear. Use the
numeric pad to enter the information. (0.1–99.9)
Memo Only the numeric pad can be used to input values.
After entering a value, click "Enter" on the numeric pad.
5
Next, click the check box to the left of Δa*.
The box to the right of Δa*≤ will become active.
Input the desired value. Clicking in the value input box will cause the numeric
pad to appear. Use the numeric pad to enter the information. (0.1–99.9)
Memo Only the numeric pad can be used to input values.
After entering a value, click "Enter" on the numeric pad.
The numeric pad will disappear, and the tolerance will be set.
(Cont.)
52