Preset - Konica Minolta CR-10 Plus Instruction Manual

Various Settings/Instrument Settings

Preset

— Confi gure as necessary —
Measurement conditions can be confi gured collectively by using the PC application to
confi gure the measurement conditions (average measurement count, tolerance, color
space, etc.) beforehand and then saving the conditions to the instrument to be called
later.
Notes Viewing or changing measurement condition details can only be performed
through the PC application.
Memo • When "Preset" is not displayed in the menu, refer to page E-59 and turn the
setting "ON" in the Instrument Menu Customization settings.
• The preset can be set to "Off", "Set. A", "Set. B", or "Set. C".
• When calling a preset, "Avg. Meas." and "Tol. Judg." will not be displayed in
the menu.
1
Go to the <MENU> screen.
MENU/OK
2
Select "Preset" and confi rm.
MENU/OK

or
3
Move to the preset to call.
MENU/OK
or 
4
Go back to the <MENU> screen.
MENU/OK
Instrument Menu Customization
Ver.1.00.0000
MENU
Back
Browse Data
Language
Avg. Meas.
Tol. Judg.
Mask Setting
Auto Off
Preset
Date/Time
USB Connec.
10:00
MENU
Back
Preset
Off
Setting A
Setting B
Setting C
(Cont.)
5
Go back to the measurement screen.
MENU/OK
<Measurement result display example when "Avg. Meas." is confi gured>
Setting
Initial Setting
● Off
Setting A
Setting B
Setting C
10:00
Set. A display
Target
87.9
L*
-0.6
a*
b * 2.9
10:00
05/05
E* 2.9
L* 2.9
a* -0.2
b* -0.4
Setting
31