Points To Remember; Pc Application Settings - Konica Minolta CR-10 Plus Instruction Manual

Points to Remember

PC Application Settings

Using the supplied PC application, the items displayed on the instrument's menus can be customized.
Change the settings as required.
Settings for the instrument can be confi gured through the "Setting" screen on the PC application.
The items that appear on the instrument's settings menu are as follows.
(Settings marked with ◎ are items that may be displayed or hidden depending on settings in the PC application. These settings are hidden by default.)
MENU Setting
Back Back
Undo
◎ Browse Data Results Display
Language Chinese
Japanese
English
◎ Avg. Meas. Off
On
2–10 times
◎ Tol. Judg. Off
On
ΔE*≤0.1–99.9
◎ Mask Setting Auto Detect
MAV
SAV
◎ Auto Off Off
10 min.
30 min.
60 min.
Details
Allows the measurement to be redone during
averaging measurements.
This item is only displayed when average
measurement data is present.
Allows the data saved to the instrument to be
viewed.
This item is only displayed when saved data is
present.
This feature displays the average of data
measured multiple times.
This setting confi gures the tolerance used for
performing tolerance judgment on
measurement results.
This function confi gures the target mask.
It is usually set to Auto Detect.
This setting allows the power to be turned OFF
automatically if the instrument is not operated
within the set number of minutes.
MENU Setting
◎ Preset Off
Setting A
Setting B
Setting C
◎ Date/Time yyyy/mm/dd
hh:mm:ss
USB Disconnect
Connec. PC
Printer
Details
This function allows measurement conditions to
be confi gured in advance.
One of three conditions can be set, Set. A, B,
or C.
This is displayed when saving data from the PC
application to the instrument has been enabled.
This function is used when an external device
is connected.
42