Settings Only Configurable From The Pc Application - Konica Minolta CR-10 Plus Instruction Manual

Environment Settings (Changing Instrument Settings)

* Settings Only Configurable from the PC Application

— Confi gure as necessary —
The buzzer is set to "ON" when the instrument is shipped from the factory.
This buzzer sound can be switched ON/OFF. Change the settings as required.
Turning the buzzer ON/OFF
The buzzer sound on the instrument can be switched ON/OFF.
Memo Beep (short) During average measurement while measuring
Beep beep When the color difference tolerance is exceeded while setting
the tolerance when the power is ON
Beep beep beep When a measurement error occurs
Beep (long) When the color difference is within the tolerance value after
average measurement is complete
1
Go to the "Setting" screen.
2
Set the buzzer to ON/OFF in the "Other Settings" settings area.
Click ○.
1
Setting
Initial Setting Setting
The buzzer will emit a sound when the power is
● ON
turned on and when measurement is complete.
The buzzer will not emit a sound when the power is
OFF
turned on or when measurement is complete.
(Cont.)
2
Details
57