Konica Minolta CR-10 Plus Instruction Manual page 46

Points to Remember
[Data] Tab
Functions related to measurement data saved to the instrument are available in the [Data] tab.
This tab allows target and sample data saved in the instrument to be imported and displayed as a list before being saved to the PC.
Measurement data saved in
instrument
Read
All data saved in the instrument is
referenced and displayed in a list.
Save to PC
Import data saved in the instrument to
a specifi ed destination.
Clear Inst. Data
Delete all data saved in the instrument.
Performing this operation will clear the
list.
Target list display area
Target List
Displays the date and time of
measurement for imported target data.
Displays the target data information for
the data selected in the above Target
List (data marked in blue).
● Target Mask
Displays the target mask
information when measuring the
target.
● Col.Sp.
Displays the color space used
during target measurement.
● Delete this Target
Deletes the selected target and the
measurement data whose color
differences are obtained by using
that target.
(Cont.)
Copy to Clipboard
Copies all sample data (data displayed
in the measurement results list) for the
selected target data in the Target list to
the clipboard.
Measurement result list display area
Meas. Result List
Displays the sample data related to the
selected target data.
Displays the information for the data
selected in the above Meas. Result
List (data marked in blue).
● Preset
Displays information on settings
when measuring the sample. This
is not displayed if the preset is set
to "None".
● Avg. M.
Displays the number of
measurements to perform when
measuring the sample. This is not
displayed for data for which
average measurement settings
have not been confi gured.
● Col.Sp.
Displays the color space used
during sample measurement.
● Del. Samp.
Deletes the selected sample data.
46