Target Color Setting (Target Measurement); Target Measurement - Konica Minolta CR-10 Plus Instruction Manual

Target Color Setting (Target Measurement)

Target Measurement

The target becomes the reference color for measuring how different another color with measurement
data is. Before measuring a sample, perform target measurement to set the target color.
Memo When the buzzer is set to ON, the buzzer will emit a sound when measuring. The
following explanations assume that the buzzer sound has been set to ON.
1
Verify that no measurement results are displayed in the target
display area.
Memo If a Target is displayed, the target has already been obtained. Click "Clear Target"
and measure the target data again, or proceed to measure color difference data.
2
Set the instrument's sample surface aperture on
the sample to measure.
3
A [When measuring remotely]
a-1 Click the measuring button on the PC
application.
Beep
The measurement results will be displayed in the target data display area on the
PC application.
B [When measuring using a trigger]
b-1 Check the box for "Use Measure Button on Inst."
b-2 Press the measuring button on the instrument.
Beep
The measurement results will be displayed in the target data display area on the
instrument and on the PC application.
4
The results will be displayed in absolute values, and the date and
time of measurement as well as the target mask information will be
displayed at the same time.
Memo If the preset is set to "None", the absolute values for "L*", "a*", "b*", "C*", and "h"
will all be displayed as the result. • If the settings have been confi gured using a
selected preset, values outside the selected color space will be displayed in gray
in the setting details.
61
b-1 a-1