Konica Minolta CR-10 Plus Instruction Manual page 58

Environment Settings (Changing Instrument Settings)
* Settings Only Confi gurable from the PC Application
— Confi gure as necessary —
LED (READY Lamp, STATUS Lamp) Display
The display settings for the LED lamps on the instrument can be changed.
When the LED display is set to ON (either set to "On" or "On for 10s"), the READY lamp
will illuminate blue, and the STATUS lamp will illuminate green or orange.
1
Go to the "Setting" screen.
2
Confi gure the LED settings in the "Other Settings" settings area.
Click ○.
1
Setting
Initial Setting Setting
The LED lamp will be illuminated when the conditions
● On
are met.
The LED lamp will be illuminated for 10 seconds
On for 10s
when the conditions are met.
The LED will not come on even when charging of the
Off
light emission circuit is complete after measurement.
(Cont.)
2
Details
58