Konica Minolta CR-10 Plus Instruction Manual page 2

Notes on this Manual
• Copying or reproduction of all or part of the contents of this manual without the
permission of KONICA MINOLTA is strictly prohibited.
• The contents of this manual are subject to change without prior notice.
• Every effort has been made in the preparation of this manual to ensure the accuracy of
its contents. However, should you have any questions or fi nd any errors, please contact
a KONICA MINOLTA-authorized service facility.
• KONICA MINOLTA will not accept any responsibility for accidents that arise from the
use of the instrument or products used other than as directed in this manual.
Offi cial names for applications and the like used in this manual
(Wording used in text) (Offi cial name)
Windows, Windows 10 Microsoft ® Windows
Windows, Windows 11 Microsoft ® Windows
Trademarks
• Microsoft, Windows, Windows 10, and Windows 11 are registered trademarks of
Microsoft Corporation in the United States and/or other countries.
Other company and product names included in this manual are trademarks or registered
trademarks of their respective companies.
® 10 Pro Operating System
® 11 Pro Operating System
■ Safety Symbols
The following symbols are used in this manual to prevent accidents that may occur as
result of incorrect use of the instrument.
Denotes a sentence regarding a safety warning or note.
Read the sentence carefully to ensure safe and correct use.
Denotes a prohibited operation.
The operation must never been performed.
Denotes an instruction.
The instruction must be strictly adhered to.
Denotes a prohibited operation.
Never disassemble the instrument.
Denotes an instruction.
Always disconnect the AC adapter from the AC outlet.
This symbol indicates alternating current (AC).
This symbol indicates direct current (DC).
This symbol indicates class II protection against electric shock.
2