Table of Contents
Advertisement
Instrument Settings
Tol. Setting
— Confi gure as necessary —
With this instrument, tolerances can be pre-confi gured and saved.
1
Go to the "Setting" screen or the "Measure" screen.
or
2
Select "None" in the "Preset" settings area.
● Settings on [None] tab
"Avg. Meas. Cnt" and "ΔE Tol." can be set in advance.
3
Click the check box to the left of ΔE*.
The box to the right of ΔE*≤ will become active.
4
Enter the tolerance.
Clicking in the value input box will cause the numeric pad to appear. Input the
value using the numeric pad. (0.1–99.9)
Memo
Only the numeric pad can be used to input values.
5
After entering a value, click "Enter" on the numeric pad.
The numeric pad will disappear, and the tolerance will be set.
(Cont.)
Instrument Menu Customization
1
2 3
Setting
Initial Setting
Setting
●
Off
0.1–99.9
On
(The setting can be confi gured to the fi rst decimal
place.)
4
5
Setting
50
Advertisement
Table of Contents
