Thermo Scientific Smart-Vue Installation Manual page 20

Thermo Fisher Scientific
Setting alarms for open / closed status change
Set your end-point module for "normally open" or "normally closed" as
described here:
1. In the Settings screen (F11), click on the Alarm settings tab.
2. Click on either Alarm on closing, if an alarm should be sent if the
dry contact closes or Alarm on opening, if an alarm should be sent if
the dry contact opens.
Figure 12. F11 ==> Alarm settings tab for dry contact end-point
module
3. Set the delay to wait before an alarm is sent.
4. Click on Close ==>Yes ==> OK to save your settings.
Please see the Thermo Scientific Smart-Vue Software User Manual for more
details on these and other important features. Click on Help ==> User
Manual ( ) to open the PDF file directly.
Smart-Vue Dry Contact Module Installation Guide
Software configuration
17