Thermo Scientific Smart-Vue Installation Manual page 18

Thermo Fisher Scientific
Testing the end-point module by running an on-demand read or status
update
You may confirm end-to-end operation by launching an on-demand read
from Smart-Vue Client.
1. Click on the sensor in the tree structure ("Dry Contact 1" in our
example).
2. Click on the latest reading (rectangle next to the top-most field in
the image below) to read the sensor wirelessly and update the
display.
Figure 10. Run an on-demand read to confirm end-to-end
communication
Smart-Vue Dry Contact Module Installation Guide
Software configuration
15