Introduction; Package Contents; Product Overview; Main Features - Thermo Scientific Smart-Vue Installation Manual

Introduction

Package contents

Product overview

Main features

Thermo Fisher Scientific
Congratulations and thank you for choosing the Thermo Scientific
Smart-Vue wireless monitoring end-point module. This manual covers
Smart-Vue end-point modules for use with dry contact devices.
This guide describes how to get your new Smart-Vue end-point module up
and running quickly. Detailed configuration instructions and software
settings are provided in the complete Thermo Scientific Smart-Vue Software
User Manual provided with your product.
• Smart-Vue wireless monitoring end-point module with battery – 3.6V
Lithium, 3600 mA (p/n SVU503-500-LSB) and attached 2-wire cable
to connect to the dry contact sensor
• Smart-Vue mounting kit with plastic holder, magnet, screws, cable ties
and plastic cable holders and Velcro
• Documentation CD-ROM
The Smart-Vue dry contact wireless end-point module can be connected to
any industry-standard device with a dry contact output. Dry contact devices
do not generate any power. The Smart-Vue end-point module emits a low
current to detect whether the switch on the other device is open or closed.
Typical devices that provide a dry contact output include alarm units, door
open/close sensors, and switches. The Smart-Vue end-point module can be
configured to detect either a "normally closed" or "normally open" state to
correspond with the device to monitor. The Smart-Vue end-point module
indicates open or closed in large characters on its LCD display.
• Configurable data logging, wireless transmission and alerts
• Automatic wireless set-up
• Wireless range indoors: 25-100 meters (82-328 ft); up to 400 meters
(1,312 ft) with 3 repeaters
• Operating temperature range for wireless end-point module: 0°C to
+50°C
®
Smart-Vue Dry Contact Module Installation Guide
Introduction
3