Data Entry / Program Section; Keypad - Novation Super Bass Station Owner's Manual

This is where you select the programs on the Super Bass Station, set the MIDI transmit and
Data Entry/Program
receive channels, set the various utility functions and store newly edited programs.

Keypad

PITCH B/ MOD D AT/ BTH MOD VELOCITY
CHORUS / DIST ARPEGGIO PANNING
EDIT
MIDI CLOCK CV / GATE CH TUNING
SAVE TYPE TRIGGERING SAVE
DEMO
COMPARE WRITE
DATA ENTRY AUDITION
1. DIGIT INPUT - using the buttons 0 to 9.
NOTE: In the MIDI RX, MIDI TX, Utility and save modes this must always be a two digit entry, for example :
To select a value of 8 —— press the "0" and "8" buttons - display reads "08".
To select a value of 17 —- press the "1" and "7" buttons - display reads "17".
2. INCREMENT/DECREMENT - using the "-" and "+" buttons.
Press the "+" button to move up to the next value.
Press the "-" button to move down to the next value.
These buttons can also be used to "scroll" through values by pressing and holding down until the desired value is reached.
20
Data Entry Keypad - Buttons
The 12 buttons of the calculator style "Data Entry" keypad are used to
PROGRAM
MIDI RX CH
call up and set the various operating parameters of each "Mode". In
MIDI TX CH
the, "MIDI RX Channel", MIDI TX Channel", "Utility" and "Save" Modes
UTILITY
WRITE SAVE
the operation of these buttons are different from the "Program Mode".
In these modes they work as follows :
You can use two methods to enter a number :
MODE