Button 4 Distortion - Novation Super Bass Station Owner's Manual

This parameter controls the depth of to which the selected LFO waveform will modulate the
Data Entry/Program
Chorus effect. The range is "00" to "99". A value of "00" will produce only a slight amount of
Utilities/Distortion
modulation, producing only a slight swirling stereo sensation. At a value of "50" the chorus
effect is quite noticeable and at a value of "99" the chorus will produce almost vibrato like
effects. This parameter is memorised with the program.
Page 3 - Distortion Drive
This display will alternate between "dS" ident ( Distortion Drive ) and it's value. Use the Data Entry / Portamento Rotary
control to adjust the value of this parameter. This parameter controls the drive of the Distortion effect. The range is:
"oF" =
"01" to "99" =
Low levels of drive produce a warm "edge" or "crunch" to a sound. High levels of drive really compress the sound and add
a much harder quality to a sound. This parameter is memorised with the program.
36
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Ident
Off or bypassed. No Distortion effect.
Level of drive to the Distortion effect.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Value