Factory Demo - Novation Super Bass Station Owner's Manual

Button ( - ) - Save Type / Compare
Button ( + ) - Save / Write
SAVE TYPE SAVE
COMPARE WRITE
To change the value of any parameter use the "Data Entry / Portamento" Rotary control.
Fine increments of parameters values can be set using the "-" and the "+" keys.
Button - Audition / Demo
DEMO
AUDITION
Pressing the Audition/Demo button when in the utility mode will start the Factory Demonstration. Pressing this button again
will stop the demonstration. This is a Montage of all the individual sound categories demo's.
NOTE: In the "Program" Mode these buttons behave differently from the Utility mode.
Pressing the "Audition / Demo" in "Program" Mode will not only activate the Demo for the category of the sound currently
selected but also will engage "Finder Mode". As an indication that the Super Bass Station is in "Finder Mode" both the
Decimal points in the display flash. Pressing the "+" and "-" buttons while in "Finder Mode" will not move up or down to the
next program but up or down to the next program in the same category. This makes it easy to audition similar sounds with-
out having to remember all the sounds locations. i.e if a"Bass" category sound is selected then pushing "+" will advance to
the next "Bass" category sound. To return to normal operation press the Audition / Demo button again. See Utilities / Sound
Category on page 32 for more information on categories and the separate sheet for more information on the Factory
sounds.
Data Entry/Program
Utilities/-/+/Demo
61