Applications Basic - Novation Super Bass Station Owner's Manual

"Selecting Programs / Finder Mode" for more information on selecting sounds. You can also
Applications
use the "Audition" button on the front panel to trigger the sounds.
Basic
On page 4 is a diagram of the basic way to set up the Super Bass Station .
Normally the setup should be as follows: If the Master Keyboard is a "Workstation" i.e. it has a Synthesiser built in, turn
"Local Off" or the equivalent in its MIDI setup. ( Refer to the manufacturers Owners Manual for details on how to do this. )
Turn the Computer Software / Sequencer's 'soft Thru" (or sometimes called "Echo Back") to the "ON" or "Enabled" position.
Now when selecting a "Track" in the Computer Software/Sequencer that is assigned to the MIDI RX channel of the Super
Bass Station, (Refer: Page 23) playing the keyboard should play the Super Bass Station through the Headphones /
Monitors. Similarly "Tracks" in the Computer Software/Sequencer that are assigned to the MIDI channel(s) of the
"Workstation" should make it produce sound. If not please refer to the Keyboard & Computer Software / Sequencer manu-
facturers Owners Manuals for details on how to do this.
NOTE: This setup does not allow the recording of knob movements on the Computer Software/Sequencer. This is because
the MIDI output of the Super Bass Station is not connected to the input of the Sequencer/Computer. To record Knob move-
ments in real-time refer Advanced Setup on page 6.
NOTE: If there are additional Keyboards/Modules connected via MIDI as shown, this diagram does not include audio for the
Keyboard/Module. The audio outputs of these devices must also be connected to the mixer.
5