Button 5 Arpeggiator - Novation Super Bass Station Owner's Manual

Button 5 - Arpeggiator
5
ARPEGGIO
Related groups of parameters are in "Pages" within each button. This buttons parameters
are used to control the Arpeggiator.
Pages exist within this button and they are selected by pressing button 5 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
Page 1 - Arpeggiator Rate
This display will alternate between "Ar" ident ( Arpeggiator Rate ) and it's value. Use the Data Entry / Portamento Rotary
control to adjust the value of this parameter. This parameter controls the rate at which the Arpeggiator sweeps though it's
patterns. The range is:
"oF" = Off. Arpeggio does not function.
"01" to "99" = Rate at which the Arpeggio sweeps. ( "01" = Slow / "99" = Fast )
NOTE: If the Arpeggiator is synced to MIDI Clock then this function is disabled and does not appear when the Arpeggio but-
ton is pressed. This parameter is memorised with the program.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/Arpeggio
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
37