Novation Super Bass Station Owner's Manual page 47

Page 1 - LFO 1 MIDI Clock Sync
This display will alternate between "L1" ident ( LFO 1 MIDI Clock Sync ) and it's value. Use the Data Entry / Portamento
Rotary control to adjust the value of this parameter. This parameter controls if LFO 1 runs on it's internal clock or synchro-
nises to incoming MIDI Clock. The range is:
"oF" = Off. The LFO is running on Internal Clock.
"02" = 32nd note triplet MIDI Clock Sync.
"03" = 32nd note MIDI Clock Sync.
"04" = 16th note triplet MIDI Clock Sync.
"06" = 16th note MIDI Clock Sync.
"08" = 8th note triplet MIDI Clock Sync.
"09" = 16th note dotted MIDI Clock Sync.
"12" = 8th note MIDI Clock Sync.
"16" = 4th note triplet MIDI Clock Sync.
"18" = 8th note dotted MIDI Clock Sync.
"24" = 4th note MIDI Clock Sync.
"32" = 2nd note triplet MIDI Clock Sync.
"36" = 4th note dotted MIDI Clock Sync.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/MIDI Clock
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
45