Button 4 Chorus - Novation Super Bass Station Owner's Manual

Data Entry/Program
CHORUS / DIST
Utilities/Chorus
Related groups of parameters are in "Pages" within each button. This button is used to access the Stereo Chorus and
Distortion parameters.
Pages exist within this button and they are selected by pressing button 4 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
Page 1 - Chorus Preset LFO's and LFO select
This display will alternate between "CP" ident ( Chorus Preset LFO's and LFO select ) and it's value. Use the Data Entry /
Portamento Rotary control to adjust the value of this parameter. This parameter selects which of the LFO's or preset
Chorus LFO's controls the speed and waveform of the chorus effect.
34
Button 4 - Chorus / Dist
4
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Ident
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Value