Novation Super Bass Station Owner's Manual page 53

When this parameter is in the range of "02" to "99" the Arpeggiator is synced to incoming
MIDI Clock. If this is the case and the Super Bass Station does not receive MIDI Clock the
Arpeggiator will appear to be stuck / not functioning. A lot of software sequencers default to
NOT transmitting MIDI Clock. If the Arpeggiator is stuck / not functioning and you have it in
MIDI Clock sync, the sequencer is not sending MIDI Clock. There is no other reason.
NOTE: The Arpeggiator will take approximately 1 to 2 beats to "lock in" to the MIDI clock so always allow for this in your
sequence. i.e. insert a blank "count in" period at the beginning of a track.This parameter is memorised with the program.
Page 4 - MIDI Clock Detector
EDIT
This display will alternate between "Cd" ident ( MIDI Clock Detector ) and "on" or "oF". When the display shows "on" MIDI
Clock is present. When the display shows "oF" MIDI Clock is not present. This feature is useful for troubleshooting your
MIDI system by checking to see if your sequencer is transmitting MIDI Clock data.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE EDIT WRITE
Ident Value
Data Entry/Program
Utilities/MIDI Clock
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
SAVE
51