Utility Mode / Operation; Button 1 Pitch Bend / Mod - Novation Super Bass Station Owner's Manual

DataEntry/Program
PITCH B/ MOD D
Utilities/Pitch/Mod
Related groups of parameters are in "Pages" within each button. This buttons parameters are used to determine how the
Pitch Bend Joystick / Wheel on your controller keyboard effects the pitch of the oscillators.
Pages exist within this button and they are selected by pressing button 1 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
Page 1 - Oscillator 1 Pitch Bend Range
This display will alternate between "P1" ident ( Oscillator 1 Pitch Bend Range ) and it's value. Use the Data Entry /
Portamento Rotary control to adjust the value of this parameter. This parameter controls the pitch bend range of oscillator 1
with the Joystick/Wheel on your controller keyboard for the current program selected. The range is "oF" to "12". This is in
semitones. "oF" = no change and "12" = twelve semitone range for oscillator 1.
This parameter is memorised with the program.
24
Button 1 - Pitch B / Mod D
1
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Ident
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE
Value