Button 7 Midi Clock - Novation Super Bass Station Owner's Manual

Page 2 - Pan Mod Depth
Data Entry/Program
Utilities/MIDI Clock
This display will alternate between "Pd" ident ( Pan Mod Depth ) and it's value. Use the Data Entry / Portamento Rotary
control to adjust the value of this parameter. This parameter controls the depth of the panning modulation. The range is "00"
to "99". At low levels only slight stereo movement will be heard. At high levels the sound will swing wildly from one channel
to the other. Note that if the"Pan Mod Source" parameter is set to "An" the "Data Entry" Rotary no longer transmits MIDI
Controller 6 ( Data Entry ) but MIDI Controller 10 ( Panning ) in this page. The range is different in this situation. The range
is L9 to L1 to Ct ( Centre ) to r1to r9. The "+" and "-" keys step through the 19 steps but the Data Entry knob utilises all 0 -
127 possibilities even though the range appears to be the same.
This parameter is memorised with the program.
Button 7 - MIDI Clock
7
MIDI CLOCK
Related groups of parameters are in "Pages" within each button. This button is used to access the various syncronization to
MIDI Clock parameters.
Pages exist within this button and they are selected by pressing button 7 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
44
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value