Button 3 Velocity - Novation Super Bass Station Owner's Manual

Button 3 - Velocity
3
VELOCITY
Related groups of parameters are in "Pages" within each button. This buttons parameters are used to determine how
Velocity on received notes via Midi effect the envelope generators and which sound category the program is in.
Pages exist within this button and they are selected by pressing button 3 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
Page 1 - Amplifier Envelope Velocity ( ENV 1 )
This display will alternate between "VA" ident ( Amplifier Envelope Velocity Depth ) and it's value. Use the Data Entry /
Portamento Rotary control to adjust the value of this parameter. This parameter controls how much velocity controls the
Amplifier Envelope Generator. The range is "00" to "99". At a value of "00" soft key strokes will produce sounds at the same
volume as hard key strokes. At a value of "99" soft key strokes will be much quieter than hard key strokes.
This parameter is memorised with the program.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/Velocity
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
31