Novation Super Bass Station Owner's Manual page 66

2 If you want to listen to a program before committing it to memory, select the "Program"
Data Entry/Program
mode ( don"t worry about which program number comes up ). Ensure that the "Write" switch
Load Sysex
is in the "Protect" position and then transmit the sysex dump from your computer. The "Edit"
LED on the display will come on to show that the program available is different to the one
displayed i.e. an "edited" program. Now you can use the "Compare" procedure to select a suitable location to store the
imported program - see the "COMPARE" section on page 10.
All Programs
If you want to overwrite all the existing programs, move the "Write" switch to the "Enable" position and transmit the sysex
dump from your computer. The "Write" LED on the display will flash to confirm reception. Return the "Write" switch to the
"Protect" position.
NOTE: if the "Write" switch is in the "Protect" position when the sysex dump is transmitted from your computer the display
will flash to indicate that the data cannot be loaded.
64