Novation Super Bass Station Owner's Manual page 42

Note: All the patterns contain velocity data. For details on each pattern see "Factory Pattern
Data Entry/Program
Data" on the separate sheet. This parameter is memorised with the program.
Utilities/Arpeggio
Page 4 - Arpeggiator Latch
This display will alternate between "AL" ident ( Arpeggiator Latch ) and it's value. Use the Data Entry / Portamento Rotary
control to adjust the value of this parameter. This parameter controls the way in which the Arpeggiator remembers which
notes you are playing or have played. The range is:
"oF"
This means that the Arpeggiator will only sweep though its patterns of notes when you hold keys down on the controller
keyboard. If you are not playing any notes on the controller keyboard no arpeggio will be heard.
"on"
This means that the arpeggio "remembers" what notes you last played. For example if you play a C triad and then release
the keys the Arpeggiator will not stop , it will continue to sweep through the C triad until a new set of notes is played, then it
will continue to sweep through the new notes until another set is played etc, etc.
40
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value