Novation Super Bass Station Owner's Manual page 51

Page 3 - Arpeggio Sync
This display will alternate between "Ar" ident ( Arpeggio Sync ) and it's value. Use the Data Entry / Portamento Rotary con-
trol to adjust the value of this parameter. This parameter controls if the Arpeggiator runs on it's internal clock or synchronis-
es to LFO 1 or incoming MIDI Clock. The range is:
"oF" = Off. The Arpeggiator is running on Internal Clock.
"-7" = Quarter Time ( x 0.25 ) of LFO1.
"-6" = Dotted ( x 0.33333 recurring ) of LFO1.
"-5" = Triplet ( x 0.375 ) of LFO1.
"-4" = Half Time ( x 0.5 ) of LFO1.
"-3" = Dotted ( x 0.66666 recurring ) of LFO1.
"-2" = Triplet ( x 0.75 ) of LFO1.
" 1" = The Same as LFO 1.
" 2" = Dotted ( x 1.33333 recurring ) of LFO1.
" 3" = Triplet ( x 1.5 ) of LFO1.
" 4" = Double Time ( x 2 ) of LFO1.
" 5" = Dotted ( x 2.66666 recurring ) of LFO1.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/MIDI Clock
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
49