Connections & Setting Up - Novation Super Bass Station Owner's Manual

Analogue synthesizer
Table of Contents

Advertisement

Connections
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: 1.This device may not cause harmful interference. 2.This device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: DO NOT OPEN CASE. NO USER SERVICEABLE PARTS INSIDE. REFER TO
& Setting up
B A S S S Y N T H E S I S E R M O D U L E
QUALIFIED SERVICE PERSONNEL.
MADE IN ENGLAND
BASIC SETUP
If you wish to use the Super Bass
Station in MONO, simply use the
left channel output only.
Connect the Left and Right sockets of the Super Bass Station to a suitable amplifier or mixing desk's stereo inputs and
set the "Volume" control on the front panel to a reasonably high output level (9-10). This will maintain a good signal to
noise ratio. Make sure that the input volume setting on your amplifier or mixer is initially set to zero.
Connect the MIDI Out from your master keyboard or sequencer to the MIDI In on the Super Bass Station and check that
the "Write" switch is in the "Protect" position. Now, connect the power supply ( Novation PSU-4 ) to the socket marked
"Power In 9VDC" and plug into a suitable AC power outlet. Switch on the power to the Super Bass Station and the dis-
play should now illuminate showing the last selected program number. Now switch on your amplifier and adjust the vol-
ume accordingly.
The master keyboard or sequencer will play the currently selected program ( the Super Bass Station is initially set at the
factory to receive on MIDI channel 1). To listen to all the factory preset sounds, first make sure the "Program" LED is on
( if not, use the "Mode" button to re-select ) and then use the "Data Entry" keypad to call up sounds. See page 9
4
OUT
CV OUT
GATE OUT
EXTERNAL
LEFT
RIGHT
AUDIO INPUT
MIDI OUT
Audio Inputs
Amplifer / Mixer and Monitors
Computer / Sequencer
-
+
IN
OUT
THRU
POWER IN
9V DC
Novation PSU4
Power Supply
MIDI OUT
MIDI IN
MIDI IN
Master Keyboard / Workstation

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bass station rack

Table of Contents