Data Entry / Program Section; Keypad - Novation TR808 Owner's Manual

Data Entry/Program

Keypad

1 3
2
DRUM SELECT FRONT CUT CONT / VELOCITY
4 5 6
NOTE-OFF REC GEN MIDI SET OUTPUT SET
8 9
7
ASSIGN BANK DISTORTION DEMO
0
SAVE TYPE TRIGGER SAVE
START STOP
COMPARE WRITE
DATA ENTRY AUTO TRIGGER
1. DIGIT INPUT - using the buttons 0 to 9.
NOTE: this must always be a two digit entry, for example :
Selecting program sound 8 —— press the '0' and '8' buttons - display reads '08'.
Selecting program sound 17 —- press the '1' and '7' buttons - display reads '17'.
2. INCREMENT/DECREMENT - using the '-' and '+' buttons.
Press the '+' button to move up to the next program or value.
Press the '-' button to move down to the next program or value.
These buttons can also be used to 'scroll' through values by pressing and holding down until the desired value is reached.
8
This is where you select the programs on the DrumStation Rack, set the MIDI transmit
and receive channels, set the various utility functions and store newly edited pro-
grams.
NOTE: When editing a program, the current position of a knob or
switch will probably be totally different to that of the program selected,
so when you turn a rotary control more than a few degrees or move a
PROGRAM
MIDI RX CH
switch expect the sound parameter to "jump" to the new value.
MIDI TX CH
UTILITY
EDIT WRITE SAVE Data Entry Keypad - Buttons
The 12 buttons of the calculator style 'Data Entry' keypad are used to
SELECT
call up and set the various operating parameters of each 'Mode'. You
AUDITION
can use two methods to enter a number :
MODE