Novation Super Bass Station Owner's Manual page 43

Note that this parameter can be controlled via MIDI.
To do so connect a sustain pedal to the master keyboard. The Super Bass Station reads
sustain information as Arpeggiator latch "on" / "off" so depressing the sustain pedal will
switch the Arpeggiator latch "on" and releasing the sustain pedal will switch Arpeggiator latch "off". For this to work properly
the master keyboard should be transmitting on the same MIDI channel as the RX channel of the Super Bass Station.
Additionally this parameter may work in the reverse manner as described if the incorrect footswitch is connected to the
master keyboard. Some master keyboards have the ability to reverse this, refer to the master keyboards owners manual for
details.
Alternatively you can control this feature from a sequencer. To do so simply transmit controller 64 with a value of 127 to turn
the Arpeggiator latch "on" and transmit controller 64 with a value of 0 to turn the Arpeggiator latch "off" on the same MIDI
channel as the RX channel of the Super Bass Station.
This parameter is memorised with the program.
Page 5 - Arpeggiator Keysync.
This display will alternate between "AY" ident ( Arpeggiator Keysync ) and it's value. Use the Data Entry / Portamento
Rotary control to adjust the value of this parameter.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/Arpeggio
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
41