Master Volume Section - Novation Nova Owner's Manual

MASTER VOLUME SECTION

Volume - Knob
This knob adjusts the overall output of the Nova on the Left & Right outputs.
NOTE: NOTE:
This can be overridden by MIDI Controller Data. If a MIDI Controller 97 with a value of "0" has been received by the Nova, no out-
put will be heard regardless of the position of this knob. To reset the volume either transmit the relevant MIDI Volume level or move
the Volume knob ( This automatically overrides the MIDI setting ).
NOTE: NOTE:
The volumes of each "Part" in a Performance can be set individually using the Part select buttons & the Level rotary in the Part
Edit Section.
NOTE: NOTE:
This is a Global control. If the Nova is used in "Local Off" mode the this knob will not change the volume unless a MIDI loop is
present. When the "Local" parameter on page 7 of the Global menu is set to "Off" this knob ( & all the other knobs & buttons ) will
not directly control the synthesiser but only output the relevant MIDI data. In this case the knob will appear to do nothing when
turned unless a MIDI loop that maps the MIDI data transmitted by the Nova back to the Nova on the Global MIDI channel.
NOTE:
NOTE:
The Master Volume Knob always behaves as if the "Knob mode" parameter on page 11 of the Global menu is set to "Normal". In
other words the Master Volume Knob is always live & turning this Knob will always alter the volume immediately regardless of the
"Knob mode" parameter's setting.
master
volume
34