Loading System Exclusive Data Dumps - Novation Super Bass Station Owner's Manual

NOTE: A lot of features on the Super Bass Station are not on the BassStation Rack and
Data Entry/Program
therefore will not be used. For example if the program you wish to transfer to the
Load Sysex
BassStation Rack uses new features, any of the parameters that are not present on the
BassStation Rack will be deleted and the sound will not be the same.
To save a single the program in the BassStation keyboard format press the "SAVE TYPE" ("-") button once again, the dis-
play changes to:
"Sb"
NOTE: A lot of features on the Super Bass Station are not on the BassStation Keyboard and therefore will not be used.
For example if the program you wish to transfer to the BassStation Keyboard uses new features, any of the parameters that
are not present on the BassStation Keyboard will be deleted and the sound will not be the same.
Ensure that your computer or data storage device is ready to accept the sysex bulk dump. Press the "SAVE" ( "+" ) button
to transmit the "All programs" dump. The Global settings ( MIDI TX and RX channels ) will also be saved.
NOTE: The display will briefly go blank as the data is transmitted.

Loading System Exclusive Data Dumps

Single Programs There are two ways of loading data. They are as follows :
1 If you want to overwrite an existing program, select the "Program" mode and call up the program number you want to
use. Now, move the "Write" switch to the "Enable" position and transmit the sysex dump from your computer. The "Write"
LED on the display will flash to confirm reception. Return the "Write" switch to the "Protect" position.
NOTE: This operation will erase the existing program and replace it with the program from the computer.
63