Button 2 Aftertouch / Breath - Novation Super Bass Station Owner's Manual

Button 2 - AT / Breath Mod
2
AT/ BTH MOD
Related groups of parameters are in "Pages" within each button. This buttons parameters
are used to determine how Aftertouch and Breath controllers via Midi effect the pitch of the
oscillators.
Pages exist within this button and they are selected by pressing button 2 again. Refer to the Ident Map on the outside back
cover of this manual for more details. To change the value of any parameter use the "Data Entry / Portamento" Rotary con-
trol. Fine increments of parameters values can be set using the "-" and the "+" Buttons.
Page 1 - Oscillator 1 and 2 Aftertouch Pitch Mod Depth
This display will alternate between "AP" ident ( Oscillator 1 and 2 Aftertouch Pitch Mod Depth ) and it's value. Use the Data
Entry / Portamento Rotary control to adjust the value of this parameter. This parameter controls the depth of pitch modula-
tion to both of the oscillators by Aftertouch from the controller keyboard. The range is "- 7" to "+7". The higher the value
more pitch shift is applied at full modulation. This parameter is memorised with the program.
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
EDIT WRITE SAVE EDIT
Ident
Data Entry/Program
Utilities/AT/Breath
PROGRAM
MIDI RX CH
MIDI TX CH
UTILITY
WRITE SAVE
Value
27