Flash Errors (Flash Error); Dynamic Configuration Error (Dynamic Configuration Error); Internal Communication Error (Internal Communication Error); Input Redundancy Error (Input Redundancy Error) - Leuze electronic LBK SBV Original Operating Instructions

8 Maintenance and troubleshooting
8.4.7

Flash errors (FLASH ERROR)

A flash error represents an error on the external flash.
8.4.8

Dynamic configuration error (DYNAMIC CONFIGURATION ERROR)

A dynamic configuration error indicates an invalid dynamic configuration ID.
8.4.9

Internal communication error (INTERNAL COMMUNICATION ERROR)

Indicates that there is an internal communication error.
8.4.10

Input redundancy error (INPUT REDUNDANCY ERROR)

Error
INPUT 1
INPUT 2
8.4.11

Fieldbus error (FIELDBUS ERROR)

At least, one of the inputs and outputs has been configured as "Fieldbus controlled", but the fieldbus
communication is not established or not valid.
NOT VALID COMMUNICATION Error on the Fieldbus
8.4.12

RAM error (RAM ERROR)

Error
INTEGRITY
ERROR
8.4.13 Sensor configuration errors (SENSOR CONFIGURATION ERROR)
Error occurred on the sensors during the configuration process or at the system power up. At least one of
the connected sensors did not get the correct configuration.
As details, the list of sensors not configured is reported.
Leuze electronic GmbH + Co. KG
Error in the redundancy on Input 1
Error in the redundancy on Input 2
Error
Wrong integrity check on the RAM
Meaning
Meaning
Meaning
Sensor LBK SBV 88