Mount Bracket For Z-Axis Rotation (Roll) - Leuze electronic LBK SBV Original Operating Instructions

7 Installation and use procedures
6. Direct the sensor up to the desired inclination (see Sensor position on page 52).
Note: a notch is equal to 10° of inclination.
7. Tighten the screws.
7.2.6

Mount bracket for z-axis rotation (roll)

Note: for an example of sensor installation, see Examples of sensor installation on the next page.
The bracket that allows rotation around the z-axis (roll) is an accessory in the package. To mount it:
1. Unscrew the screw at the bottom and remove the bracket with the sensor and the aligning ring.
Leuze electronic GmbH + Co. KG Sensor LBK SBV 65