Structures - Leuze electronic LBK SBV Original Operating Instructions

4 Get to know LBK SBV System
4.2.3

Structures

LBK ISC BUS PS
LBK ISC-03
Part
A I/O terminal block
B System status LEDs
C Network parameter reset button
D Reserved for internal use. Output reset button
E Micro-USB port (micro-B type) for connecting
the PC and communicating with the LBK
Designer application
F Micro-USB port (reserved)
G Fieldbus status LEDs
See Fieldbus status LEDs on the next page
H Ethernet port with LEDs for connecting the PC,
communicating with the LBK Designer
application, and for MODBUS communication
I Power supply terminal block
J Power supply LEDs (steady green)
K CAN bus terminal block for connecting the first
sensor
L DIP switch to turn on/off the bus termination
resistance:
l
l
Leuze electronic GmbH + Co. KG
Description
On (top position, default) = resistance
included
Off (bottom position)= resistance excluded
LBK ISC-02
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS
LBK ISC BUS PS
LBK ISC BUS PS, LBK ISC-02
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
LBK ISC BUS PS, LBK ISC-02, LBK ISC-03
Sensor LBK SBV
Controller
21