Fieldbus Connection; Modbus Connection; Session Authentication; Validation - Leuze electronic LBK SBV Original Operating Instructions

8 Maintenance and troubleshooting
8.3.10

Fieldbus connection

The Fieldbus communication status is logged as CONNECTED, DISCONNECTED or FAULT.
Format: Fieldbus connection CONNECTED/DISCONNECTED/FAULT
Example:
20 2020/11/18 16:47:25 [INFO] CONTROLLER Fieldbus connection CONNECTED
8.3.11

MODBUS connection

The MODBUS communication status is logged as CONNECTED or DISCONNECTED.
Format: MODBUS connection CONNECTED/DISCONNECTED
Example:
20 2020/11/18 16:47:25 [INFO] CONTROLLER MODBUS connection CONNECTED
8.3.12

Session authentication

The status of the session authentication and the interface used (USB/ETH) are logged.
Format: Session OPEN/CLOSE/WRONG PASSWORD/UNSET PASSWORD/TIMEOUT/CHANGE
PASSWORD via USB/ETH
Example:
20 2020/11/18 16:47:25 [INFO] CONTROLLER Session OPEN via USB
8.3.13

Validation

Every time a validation activity starts or ends on the device, it is logged. The interface used (USB/ETH) is
logged as well.
Format: Validation STARTED/ENDED via USB/ETH
Example:
20 2020/11/18 16:47:25 [INFO] CONTROLLER Validation STARTED via USB
8.3.14

Log download

Every time a log download is performed on the device, it is logged. The interface used (USB/ETH) is logged
as well.
Format: Log download via USB/ETH
Example:
20 2020/11/18 16:47:25 [INFO] CONTROLLER Log download via USB
Leuze electronic GmbH + Co. KG Sensor LBK SBV 86