Timestamp (Seconds Counter From The Latest Boot); Timestamp (Absolute/Relative Value); Event Description - Leuze electronic LBK SBV Original Operating Instructions

Safe radar system

Table of Contents

8 Maintenance and troubleshooting

8.2.5

Timestamp (seconds counter from the latest boot)

An indication of the instant when the event occurred is provided as relative time from the latest boot, in

seconds.

Example: 92

Meaning: the event occurred 92 seconds after the latest boot

8.2.6

An indication of the instant when the event occurred is provided.

After a new system configuration, it is provided as absolute time.

Format: YYYY/MM/DD hh:mm:ss

Example: 2020/06/05 23:53:44

After a reboot of the device, it is provided as relative time from the latest boot.

Format: Rel. x d hh:mm:ss

Example: Rel. 0 d 00:01:32

Note: when a new system configuration is performed, even the older timestamps are updated in absolute

time format.

Note: during system configuration, the controller is receiving the local time of the machine where the

software is running.

8.2.7

A complete description of the event is reported. Whenever possible, depending on the event, additional

parameters are reported.

In case of a diagnostic event, an internal error code is also added, useful for the purpose of debug. If the

diagnostic event disappears, the label "(Disappearing)" is reported as an additional parameter.

Examples

Detection access (field #3, 1300 mm/40°)

System configuration #15

CAN ERROR (Code: 0x0010) COMMUNICATION LOST

CAN ERROR (disappearing)

Leuze electronic GmbH + Co. KG

Sensor LBK SBV

Table of Contents