Position Of The Field Of View; Dangerous Area Calculation; Introduction; Formula - Leuze electronic LBK SBV Original Operating Instructions

6 Sensor position
6.2.5

Position of the field of view

The field of view is shifted of 2.5°. To understand the actual position of the sensor field of view consider the
LED position:
downward with sensor LED up
l
right with sensor LED on the left (with respect to the sensor center, facing the sensor)
l
left with sensor LED on the right (with respect to the sensor center, facing the sensor)
l
Side view with sensor inclination 0°.
Top view with sensor inclination 0°.
6.3

Dangerous area calculation

6.3.1

Introduction

The dangerous area of the machinery to which LBK SBV System is applied must be calculated as indicated
in standards ISO 13855:2010.
6.3.2

Formula

To calculate the depth of the dangerous area (S), use the following formula:
Leuze electronic GmbH + Co. KG
Top view with sensor inclination 0°.
Table Cell Outside Table:
Sensor LBK SBV 54