3-Axes Structure; Status Led; Lbk Designer Application; Functions - Leuze electronic LBK SBV Original Operating Instructions

4 Get to know LBK SBV System
4.3.3

3-axes structure

Part
A
B
C
D
E
F
G
4.3.4

Status LED

Status
Steady blue
Flashing blue
Purple
Red
4.4

LBK Designer application

4.4.1

Functions

The application permits the following main functions to be performed:
Configure the system.
l
Create the configuration report.
l
Check system functioning.
l
Download system log.
l
Leuze electronic GmbH + Co. KG
Sensor
Status LED
Tamper-proof screws to position the sensor at a specific angle around x-axis (tilt 10°
steps)
Mounting bracket
Tamper-proof screw to position the sensor at a specific angle around y-axis (pan 10°
steps)
Connectors for connecting the sensors in a chain and to the controller
Tamper-proof screw to position the sensor at a specific angle around z-axis (roll 10°
steps)
Sensor is working. No motion detected.
Sensor is detecting motion. Not available if the sensor is in muting.
Firmware update conditions (see Sensor LED on page 78)
Error conditions (see Sensor LED on page 78)
Description
Meaning
Sensor LBK SBV 28