Example Of Stopping Points; Validate The System With Lbk Designer; Troubleshooting Validation - Leuze electronic LBK SBV Original Operating Instructions

7 Installation and use procedures
7.3.5

Example of stopping points

Stopping points for 100° field of view
7.3.6

Validate the system with LBK Designer

When the validation function is active, the system response time is not guaranteed.
The LBK Designer application is helpful during the safety functions validation phase and allows the actual
field of view of the sensors to be checked based on their installation position.
1. Click Validation: the validation starts automatically.
2. Move in the monitored area as indicated in Validate the access detection function on page 70 and
Validate the restart prevention function on the previous page.
3. Check that the sensor behaves as expected.
Note: if the static object detection option is enabled, the empty dot represents a moving target, and the
full dot represents a static target.
4. Check that the distance and the angle where the motion is detected are the expected values.
7.3.7

Troubleshooting validation

Cause
Presence of objects obstructing
the field of view
Position of sensors
Inclination and installation height
of one or more sensors
Only with the static object
detection option enabled,
inadequate restart timeout
Leuze electronic GmbH + Co. KG
WARNING
Solution
If possible, remove the object. Otherwise, implement additional safety
measures in the area where the object is present.
Position the sensors to ensure that the monitored area is adequate for
the dangerous area (see Sensor position on page 52).
1. Change the inclination and installation height of the sensors to
2. Note or update the inclination and installation height of the sensors
Change the restart timeout through the LBK Designer application
(Configuration > select the affected sensor and detection field)
ensure that the monitored area is adequate for the dangerous area,
(see Sensor position on page 52).
in the printed configuration report.
Sensor LBK SBV 72