Safety; Safety Information; Safety Messages; Safety Symbols On The Product - Leuze electronic LBK SBV Original Operating Instructions

Safe radar system

Table of Contents

3 Safety

Safety

3.1

Safety information

3.1.1

Safety messages

Warnings related to the safety of the user and of the equipment as envisaged in this document are as

follows:

Indicates a hazardous situation which, if not avoided, may cause death or serious injury.

NOTICE

Indicates obligations that if not observed may cause harm to the equipment.

3.1.2

Safety symbols on the product

This symbol marked on the product indicates that the manual must be consulted. In particular, pay attention

to the following activities:

wiring of the connections (see Terminal blocks and connector pin-outs on page 96 and Electrical

connections on page 99)

cable operating temperature (see Terminal blocks and connector pin-outs on page 96)

controller cover, which was subjected to a low energy impact test (see Technical data on page 92)

3.1.3

Personnel skills

The recipients of this manual and the skills required for each activity presented herein are as follows:

Recipient

Machinery

manufacturer

Protection

system installer

Machinery

maintenance

technician

Leuze electronic GmbH + Co. KG

WARNING

Assignments

Defines which protective devices

should be installed and sets the

installation specifications

Installs the system

Configures the system

Prints configuration reports

Performs maintenance on the system

Knowledge of significant hazards of the

machinery that must be reduced based on

risk assessment.

Knowledge of the entire machinery safety

system and the system on which it is

installed.

Advanced technical knowledge in the

electrical and industrial safety fields

Knowledge of the dimensions of the

dangerous area of the machinery to be

monitored

Receives instructions from the machinery