10 Appendix; System Software; Introduction; Configuration - Leuze electronic LBK SBV Original Operating Instructions

10 Appendix
10 Appendix
10.1

System software

10.1.1

Introduction

The aim of this appendix is to provide and clarify the information related to the system software. It includes
the information necessary for the integrator during the installation and integration in accordance with IEC
61508-3 Annex D.
Considering that LBK SBV System is an embedded system provided with a firmware already deployed on
board, no software integration is required by the system installer or by the end user. The following
paragraphs analyzes all the information required in IEC 61508-3 Annex D.
10.1.2

Configuration

The system configuration can be performed by means of a PC-based configuration tool, called the LBK
Designer application.
The system configuration is described in Installation and use procedures on page 61.
Leuze electronic GmbH + Co. KG Sensor LBK SBV 114