Nortel Remote Gateway 9150 Installation And Administration Manual page 234

Configuring the Remote Gateway 9150 unit
Field
Security Id: Inbound
Security ID
Security Id: Outbound
Security ID
Caller ID
206
Description
If you selected Provision ID as the security level, enter the
Security ID for incoming calls.
This ID must be a 10-digit password. The Remote
Gateway 9150 unit compares the security ID of the
incoming call to the Inbound Security ID that is configured
in this field. If the security IDs do not match, the Remote
Gateway 9150 unit rejects the call.
If you selected Provision ID as the security level, enter the
Security ID for outgoing calls.
This ID must be a 10-digit password. The Remote
Gateway 9150 unit sends the outbound security ID to the
RLC. The RLC compares this ID to the configured
Outbound Security ID that it has for this remote unit. If the
security IDs do not match, the RLC rejects the call.
Click on the Caller ID button to configure the DN of the
network port dedicated for connections to this Remote
Gateway 9150 unit. When the RLC calls the Remote
Gateway 9150 unit, it sends its Caller ID to the 9150 unit.
The Remote Gateway 9150 unit compares the caller ID
with the list of Caller IDs configured, and, if it does not
find a match, it rejects the call.
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0