Nortel Remote Gateway 9150 Installation And Administration Manual page 389

June 2005
Symptom
CONFIG UPLOAD FAILED
attempting to perform a
configuration upload by TFTP.
(continued)
System not responding
displays when working with
Configuration Manager.
Nothing happens when
attempting to log off from the
Remote Gateway 9150 unit.
Remote Gateway 9150 Installation and Administration Guide
What to do
when 2 Ensure that the configuration file you are
attempting to upload is compatible with
current Remote Gateway 9150 firmware.
Perform the configuration upload using a
previous configuration file, if necessary.
Note: Each time you perform a Remote
Gateway 9150 firmware upgrade, create a
backup of the configuration. The
configuration database format in the
Remote Gateway 9150 unit is dependent
on the version of firmware installed on the
Remote Gateway 9150 unit. If you
recently downgraded to a previous version
of Remote Gateway 9150 firmware, you
might also need to revert to a previous
configuration format.
It is possible that communication has been
lost between the administration PC and the
Remote Gateway 9150 unit.
Close Configuration Manager, and then
restart it.
It is possible that communication has been
lost between the administration PC and the
node you were logged on to.
Close Configuration Manager, and then
restart it.
Troubleshooting
361