Installing The Remote Gateway 9150 Unit On The Wall - Nortel Remote Gateway 9150 Installation And Administration Manual

Installing the Remote Gateway 9150 unit

Installing the Remote Gateway 9150 unit on the wall

To install the Remote Gateway 9150 unit on the wall:
Do not affix the rubber feet to the bottom of the Remote Gateway 9150 unit.
Otherwise, the unit cannot be mounted flush against the wall.
To mount the Remote Gateway 9150 unit on the wall, you must provide your
own screws. You need suitable size screws that are long enough to ensure the
Remote Gateway 9150 unit is securely mounted.
When mounting the Remote Gateway 9150 unit on the wall, you must use
standard telephony installation practices. The unit must be mounted so that:
the cables are at right angles to the unit
the rear (connection) panel faces left or right
Ensure that:
the LED indicators on the front panel can be viewed easily
the chosen location provides enough space to accommodate the cables
when they are connected to the Remote Gateway 9150 unit
Refer to the diagram on page 101.
100 Remote Gateway 9150 Installation and Administration Guide
Standard 4.0